Radiation-induced wood plastic composites under combinations of monomers

Radiation-induced wood plastic composites (WPC) were prepared from five varieties of Bangladeshi timbers, using seven different types of monomers. The mixtures of double and triple monomers were investigated along with the single-monomer system for the preparation of composites. Among the three systems, single-monomer process showed the highest polymer loading with butylmethacrylate (BMA). Tensile strength (TS) property, represented as T_f = TS_wpc/TS_wood was determined. Highest T_f values were achieved with the soft wood. The effects of dose and dose rate, monomer concentration, and swelling agent were also studied. Suitable total dose was found to be 3 Mrad at 0.8 Mrad/h, and methanol exhibited the best swelling ability for the woods at a ratio of 1 : 9 v/v in all the monomer investigated.     

Ricinoleic acid inPhyllanthus niruri seed oil

Seed oil ofPhyllanthus niruri (Euphorbiaceae) contains 1.2% ricinoleic (12-hydroxy-cis-9-octadecenoic) acid, previously unknown in the genusPhyllanthus. Identification is based on thin layer and gas liquid chromatography, infrared, nuclear magnetic resonance, and mass spectrometry analysis as well as chemical methods. Other major components of the oil are linoleic acid (21%) and linolenic acid (51.4%). Presented at the ISF/AOCS World Congress, April 1980, New York City.     

Reaction of Hydrogen Bromide with Long Chain 1,2-Diols

The reactions of 1,2-hexadecanediol and 1,2-octadecanediol with hydrogen bromide in the presence of acetic anhydride have been investigated. The treatment of hydrogen bromide (48%) in acetic anhydride with 1,2-hexadecanediol gives mainly 1-bromo-2-acetoxy hexadecane (66%), 2-acetoxy hexadecanol (26%), and 1,3-hexadecanediol (8%). Similar products result from 1,2-octadecanediol. The structures of the products are based on combustion data, spectroscopic, and chemical evidences. The mechanism of the reaction has been discussed.     

Ambient‐cured polyesteramide‐based anticorrosive coatings from linseed oil—A sustainable resource

Ambient‐cured polyesteramide (APEA) coating resin synthesized from dihydroxy fatty amide obtained from linseed oil, a sustainable resource, and poly(styrene‐co‐maleic anhydride), a bifunctional acid component, was found to exhibit improved physicomechanical and anticorrosive properties. The structural elucidation of APEA resin has been carried out by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The physicomechanical and chemical resistance properties were investigated by standard methods. The corrosion resistance performance was evaluated in acid, alkali, and organic solvent. The thermal behavior was studied by TGA technique. A comparative study of these properties of APEA with reported baked polyesteramide (PEA) coatings was carried out. A remarkable improvement in the drying property of APEA was observed. The APEA coatings also showed improved physicomechanical and anticorrosive properties as compared to the baked PEA coatings. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1818–1824, 2005     

Overview of Fine-Scale Piezoelectric Ceramic/Polymer Composite Processing

In the past two decades, piezoelectric ceramic/polymer composites with different connectivities have been developed for transducer applications such as hydrophones, biomedical imaging, nondestructive testing, and air imaging. Recently, much attention has been given to fine-scale piezoelectric ceramic/polymer composites. These composites allow higher operating frequencies, and thus increased resolution, in medical imaging transducers. In this review, methods for processing fine-scale piezoelectric ceramic/polymer composites are discussed. The current capabilities, strengths, and weaknesses of each method are compared. The importance of spatial scale in composite performance is also reviewed. Several of the processing methods have demonstrated composites with fine-scale ceramic phases (<50 μm), and others have potential to form composites with a ceramic scale of under 20 μm.     

Thermoelectric properties of SbNCa3 and BiNCa3 for thermoelectric devices and alternative energy applications

Thermoelectric properties of two antiperovskites SbNCa₃ and BiNCa₃ are calculated using first principles calculations. High values of Seebeck coefficients are observed for these materials. Electrical and thermal conductivities are also calculated. Increase in thermal conductivity and decrease in electrical conductivity are found with increasing temperature. The maximum values of thermal conductivity are 92×10¹⁴  W/m K s and 88×10¹⁴  W/m K s for SbNCa₃ and BiNCa₃ respectively at a temperature of 900 K. The peak values of 5×10²⁰/Ω m s and 5.2×10²⁰/Ω m s are achieved for n-type SbNCa₃ and BiNCa₃ respectively at a temperature of 300 K. Figure of merit is achieved for these materials at room temperature which shows that these materials can be useful for thermoelectric devices and alternative energy sources.     

Effect of Addition of Ni metal catalyst onto the Co and Fe supported catalysts for the formation of carbon nanotubes

Production of novel porous material is a major target in current material science research due to its wide applications. As carbon nanotube (CNTs) is a one dimensional hollow structure it is also one of the promising materials in applications ranging from electronics to hydrogen storage medium. Catalytic chemical vapor deposition (CCVD) is a method whereby CNTs can be produced in large amount. Thus, in this work, we have synthesized CNTs via pyrolysis of acetylene using various supported transition-metal catalysts in a fixed-bed reactor. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to investigate the CNTs structure. The structures of nanotubes formed by acetylene pyrolysis were dependent on the catalysts used. It was found that alumina supported Ni/Fe catalyst inhibited the formation of CNTs growth while alumina supported Ni/Co catalyst gave high density of CNTs. However, nanotubes grown over alumina supported Ni/Fe catalyst were less dense due to the deactivation of the catalyst at the early stage of the pyrolysis process.     

Micellar association in simultaneous presence of organic salts/additives

Viscosity measurements under Newtonian flow conditions had been performed on cetyltrimethylammonium bromide (CTAB) aqueous solutions in the combined presence of sodium salts of aromatic acids (sodium salicylate, NaSal; sodium benzoate, NaBen; sodium anthranilate, NaAn) and organic additives (1-hexanol, C₆OH; n-hexylamine, C₆NH₂) at 30°C. On addition of C₆OH or C₆NH₂, the viscosity of 25 mM CTAB solution remained nearly constant without salt as well as with a lower salt concentration. This is due to low CTAB concentration which is not sufficient to produce structural changes in this concentration range of salts. However, as the salt concentration was increased further, the effect of C₆OH/C₆NH₂ addition was different with different salts: The viscosity first increased; then a decrease was observed with the former while with C₆NH₂ a decrease followed by constancy appeared in plots of relative viscosities (η _r ) vs. organic additive concentrations. At further higher salt concentration, the magnitude of η _r was much higher. The viscosity increase is explained in terms of micellar growth and the decrease in terms of swollen micelle formation (due to interior solubilization of organic additive) or micellar disintegration (due to formation of water + additive pseudophase).     

The antioxidant activity of amino acids in two vegetable oils

Of 27 amino acids studied, most had some antioxidant activity when added in aqueous solution to either safflower oil or a mixture of sunflower and cottonseed oil (active oxygen and storage methods). Cysteine-HCl, glutamic acid-HCl (in the mixture), and glutamic acid-HCl (in safflower oil) behaved as prooxidants. When added as a solid, most amino acids were ineffective. The protection factors of these amino acids were less than 1.3 in safflower oil with methionine, proline, lysine and cysteine providing the highest activ-ity. In the oil mixture (which had a higher metal content) lysine, arginine, glutamic acid, methionine, and hydroxyproline were anti-oxidant with protection factors of up to 1.85. Chelation of metals by amino acids was presumably responsible for the antioxidant activity. The increase in cysteine concentration up to 1% has more than doubled the protection factor in Bint oil (compared with the 0.01% level), whereas with some other amino acids the increase was either small or slight.     

Growth and formation mechanism of sea urchin-like ZnO nanostructures on Si

Sea urchin-like nanostructures of ZnO consisting of ZnO nanowires with blunt faceted ends were grown on Si (100) substrates by oxidation of metallic Zn at 600 °C. ZnO nanowires having a diameter of 30–60 nm and length of 2–4 Μm were in similar shape with uniform diameter along its entire length with well faceted blunt ends. X-ray diffraction and transmission electron microscope analysis showed that the as-grown nanostructures were highly crystalline with wurtzite hexagonal structure having lattice constants of a=b=3.25 å and c=5.21 å. Room temperature photoluminescence (PL) measurements showed a weak near band-edge emission at 380 nm, but a strong green emission at 500–530 nm. A model for vapor-solid (VS) growth mechanism of ZnO nanowires was presented, in which nucleation of ZnO is crucial for the growth of the nanostructures.